Sold Work
-
Two Brackets and a Large Bolt Within a Red and Yellow Circle
13″ x 12″ | encaustic with assemblage on mdf | 2015 | SOLD
-
Concentric Circles With Six Tethered Screws
13″ x 12″ | encaustic with assemblage on mdf | 2015 | SOLD
-
Concentric Circles With Two Washers Tethered to a Bracket
10″ x 10″ | encaustic with assemblage on plywood | 2015 | SOLD
-
Concentric Circles With Eight Roofing Nails
11″ x 11″ | encaustic with assemblage on plywood | 2015 | SOLD
-
Spring EO2
11″ x 9″ | mixed media with assemblage on plywood | 2015 | SOLD This little guy was created in conjunction with a special project I was invited to take part in by Seth Apter. Seth is a mixed media artist from NYC that I stumbled across online some time ago. One of his many talents…
-
Markings: SS08142004
24″ x 24″ | mixed media with assemblage on plywood | commission archive #201432
-
Remove From These Two Points
9″ x 12″ | mixed media, encaustic, and assemblage on panel | 2014 | archive #201430 | SOLD
-
Striations Between Green & Yellow
32″ x 15″ | mixed media and encaustic on plywood | 2014 | archive #201428 | SOLD
-
Three Brass Knobs
16″ x 12″ | mixed media and brass knobs on plywood | 2014 | archive #201426 | SOLD
-
Yellow Over Blue with a Mending Plate
12″ x 9″ | mixed media, encaustic, and assemblage on panel | 2014 | archive #201429 | SOLD
-
Two Circular Imprints with an X
10″ x 10″ | encaustic and mixed media on plywood | 2014 | archive #201419 | SOLD
-
Three Hex Bolts
10″ x 10″ | mixed media on plywood | 2014 | archive #201418 | SOLD Some of the interesting textures that appear in this piece come from a technique of applying shellac over a layer of hardened wax, and then lighting the shellac on fire.
-
Markings: Not to Exceed 80 PSI
19″ x 26″ x 2.5″ | assemblage and mixed media on plywood | 2014 | archive #201416 | SOLD
-
Paintings 7 and 8 (diptych) from the series: Small Encaustic Assemblages
9″ x 9″ x 1.5″ framed | encaustic, mixed media, and drawer pulls on panels | 2014 | archive #201414 and #201415 | SOLD
-
Paintings 1 – 6 from the series: Small Encaustic Assemblages
9″ x 9″ x 1.5″ framed | encaustic, mixed media, and hardware on plywood | 2014 | $100 each
-
A Sprocket Tethered Between Two Bearings
24″ x 24″ | rust, paint, wax, and other materials on steel | SOLD archive #201406
-
Markings: Seventy Two
25″ x 25″ | rust, paint, tar, bolts and other materials on steel | SOLD archive #201403 This is another piece in my ongoing attempts to make some of my artwork look like I found it on the side of an industrial building or train box car.
-
Three White Marks Above Green
13″ x 10.5″ | encaustic and mixed media on panel | SOLD archive #201337
-
Mending Plate Tethered To Three Bolts
12″ x 9″ | encaustic and mixed media on panel | SOLD archive #201336