Tag: encaustic
-
-
-
-
-
Two Brackets and a Large Bolt Within a Red and Yellow Circle
13″ x 12″ | encaustic with assemblage on mdf | 2015 | SOLD
-
Concentric Circles With Six Tethered Screws
13″ x 12″ | encaustic with assemblage on mdf | 2015 | SOLD
-
Concentric Circles With Two Washers Tethered to a Bracket
10″ x 10″ | encaustic with assemblage on plywood | 2015 | SOLD
-
Concentric Circles With Eight Roofing Nails
11″ x 11″ | encaustic with assemblage on plywood | 2015 | SOLD
-
Concentric Circles With Four Brackets
11″ x 11″ | encaustic with assemblage on plywood | 2015 | SOLD
-
-
-
-
Remove From These Two Points
9″ x 12″ | mixed media, encaustic, and assemblage on panel | 2014 | archive #201430 | SOLD
-
Striations Between Green & Yellow
32″ x 15″ | mixed media and encaustic on plywood | 2014 | archive #201428 | SOLD
-
Yellow Over Blue with a Mending Plate
12″ x 9″ | mixed media, encaustic, and assemblage on panel | 2014 | archive #201429 | SOLD
-
-
-
Two Circular Imprints with an X
10″ x 10″ | encaustic and mixed media on plywood | 2014 | archive #201419 | SOLD
-
Three Hex Bolts
10″ x 10″ | mixed media on plywood | 2014 | archive #201418 | SOLD Some of the interesting textures that appear in this piece come from a technique of applying shellac over a layer of hardened wax, and then lighting the shellac on fire.
-
Paintings 7 and 8 (diptych) from the series: Small Encaustic Assemblages
9″ x 9″ x 1.5″ framed | encaustic, mixed media, and drawer pulls on panels | 2014 | archive #201414 and #201415 | SOLD
-
Paintings 1 – 6 from the series: Small Encaustic Assemblages
9″ x 9″ x 1.5″ framed | encaustic, mixed media, and hardware on plywood | 2014 | $100 each
-
-
Three White Marks Above Green
13″ x 10.5″ | encaustic and mixed media on panel | SOLD archive #201337
-
Mending Plate Tethered To Three Bolts
12″ x 9″ | encaustic and mixed media on panel | SOLD archive #201336
-
-
-
Two Square Cut Nails with Copper Wire
13″ x 10.5″ | encaustic, mixed media, and assemblage on panel | $150 archive #201333
-
-
A Washer Tethered Between Two Brackets
11″ x 11″ x 1.5″ | encaustic with assemblage on panel | SOLD archive #201325
-
-
Mending Plate with Grate Imprint
11″ x 11″ x 1.5″ | encaustic with assemblage on panel | SOLD archive #201323
-
Insert Into Pipe Flange
15″ x 11″ x 1.5″ | mixed media with assemblage on panel | SOLD archive #201322
-
-
-
-
-
Eight Inch Mending Plate
10″ x 8″ | encaustic, mixed media, and assemblage on plywood | archive #201313 | SOLD
-
-
Wall Segments No. 9
24″ x 24″ | plaster, encaustic, assemblange and other mixed media on panel | SOLD archive #201305
-
