Sold Work
-
-
-
-
-
Two Circular Imprints with an X
10″ x 10″ | encaustic and mixed media on plywood | 2014 | archive #201419 | SOLD
-
Three Hex Bolts
10″ x 10″ | mixed media on plywood | 2014 | archive #201418 | SOLD Some of the interesting textures that appear in this piece come from a technique of applying shellac over a layer of hardened wax, and then lighting the shellac on fire.
-
Markings: Not to Exceed 80 PSI
19″ x 26″ x 2.5″ | assemblage and mixed media on plywood | 2014 | archive #201416 | SOLD
-
-
Paintings 7 and 8 (diptych) from the series: Small Encaustic Assemblages
9″ x 9″ x 1.5″ framed | encaustic, mixed media, and drawer pulls on panels | 2014 | archive #201414 and #201415 | SOLD
-
Paintings 1 – 6 from the series: Small Encaustic Assemblages
9″ x 9″ x 1.5″ framed | encaustic, mixed media, and hardware on plywood | 2014 | $100 each
-
A Sprocket Tethered Between Two Bearings
24″ x 24″ | rust, paint, wax, and other materials on steel | SOLD archive #201406
-
-
-
Markings: Seventy Two
25″ x 25″ | rust, paint, tar, bolts and other materials on steel | SOLD archive #201403 This is another piece in my ongoing attempts to make some of my artwork look like I found it on the side of an industrial building or train box car.
-
Markings: A070606 & C101312
24″ x 12″ each | mixed media on steel | commission archive #201401 and #201402 This diptych is the start of a new series of work I am creating on steel. Most of the reds and browns in these two pieces are the result of rusting techniques that I am applying to the steel in an…
-
Three White Marks Above Green
13″ x 10.5″ | encaustic and mixed media on panel | SOLD archive #201337
-
Mending Plate Tethered To Three Bolts
12″ x 9″ | encaustic and mixed media on panel | SOLD archive #201336
-
-
-
-
-
Three Pipe Hangers with a Mending Plate
28″ x 20″ | mixed media with assemblage on wafer board | SOLD archive #201328
-
A Washer Tethered Between Two Brackets
11″ x 11″ x 1.5″ | encaustic with assemblage on panel | SOLD archive #201325
-
Emergency Fuel Cut Off
28″ x 22″ x 2″ | mixed media with assemblage on wafer board | SOLD archive #201327
-
-
Mending Plate with Grate Imprint
11″ x 11″ x 1.5″ | encaustic with assemblage on panel | SOLD archive #201323
-
Insert Into Pipe Flange
15″ x 11″ x 1.5″ | mixed media with assemblage on panel | SOLD archive #201322
-
-
-
Pull Here
24″ x 24″ | mixed media on plywood | SOLD archive #201318 If you’re interested in reading about how this painting was created, view my blog post that covers highlights of the process.
-
-
-
-
-
Eight Inch Mending Plate
10″ x 8″ | encaustic, mixed media, and assemblage on plywood | archive #201313 | SOLD
-
-
Two Steel Safety Plates
20″ x 24″ | mixed media and assemblage on wafer board | archive #201315 | SOLD
-
Wall Segments No. 9
24″ x 24″ | plaster, encaustic, assemblange and other mixed media on panel | SOLD archive #201305
-
-
