Process

  • Art as Process – A Conversation with Domenick Naccarato – Lehigh Valley Arts Podcast Episode 6, Season 2

    Art as Process – A Conversation with Domenick Naccarato – Lehigh Valley Arts Podcast Episode 6, Season 2

    I’m very thankful to the folks over at Steel Pixel Studios for featuring me on their latest episode of the Lehigh Valley Arts Podcast where I had the pleasure of chatting with host Ben Orr and my friend and local artist Keith Garubba. We talked about my beginnings as an artist, where I pull inspiration…

  • How to Rust Galvanized Steel

    How to Rust Galvanized Steel

    Many of the rusty looking assemblage elements that I add to my art actually start out as clean pieces of metal. I love to incorporate tie plates and nail plates that are used in construction, but in most cases this type of steel has a galvanized finish to prevent them from rusting. Through a variety…

  • Spring EO2

    Spring EO2

    11″ x 9″ | mixed media with assemblage on plywood | 2015 | SOLD This little guy was created in conjunction with a special project I was invited to take part in by Seth Apter. Seth is a mixed media artist from NYC that I stumbled across online some time ago. One of his many talents…

  • Using Bench Cookies to Prop up Work

    Using Bench Cookies to Prop up Work

    Every so often I work on a piece of plywood or MDF that I haven’t cradled in the back. This can make it somewhat of a challenge when I need to attach hardware or drill through it for my various assemblage elements. Because these panels aren’t too thick, whatever I screw in will typically break through to the…

  • Getting Stencils to Stay in Place

    Getting Stencils to Stay in Place

    I’ve been using a lot of stencils lately for getting the letters, numbers, or words onto my paintings. Most of the stencils I make are done on a heavier stock paper, so there’s already some rigidity there which helps when working with them. But in order to get my stencils to stay put while I’m…

  • DIY Gridwall for Art Fair Tent

    DIY Gridwall for Art Fair Tent

    I needed a way to hang my paintings within the space of my tent at the upcoming Riverside Festival of the Arts. Instead of buying gridwall panels I decided to make my own. My version of gridwall is a 48″ wide by 84″ tall panel with 6″x12″ grid spacing. Here’s how I did it… You…

  • Highlights of the Process for Making ‘Pull Here’

    Highlights of the Process for Making ‘Pull Here’

    Lately, most all of my paintings start with an object or set of objects that I use to form the basis of the piece. In the case of ‘Pull Here‘, it started with this- a door pull from Home Depot: This grabbed my attention and I immediately saw it in use with some markings or…